lost password? create account
Browse By Manufacturers
BROWSE BY CATEGORIES
SITE MAPS
HTML Site Map
XML Site Map
SOCIAL NETWORKS
Facebook Twitter Page RSS
Top Notch Tactical is upfront
Home  |  AR-15 & M-16 Parts  |  Upper Receiver Parts  |  Dust Cover ID Tag
Dust Cover ID Tag [Dust Cover ID Tag]
Price: $12.99
* Select Caliber
* Quantity:  
* = Required Field
Our AR-15 Dust Cover gives you the ability to have all of your different AR-15 uppers clearly marked for caliber. The cover will be finished in Black Armor-Tuff® and the caliber of your upper clearly marked. Changing them is very easy, but care must be taken to not lose the c-clips and to reassemble it correctly. Please read and follow the instructions below to get your new cover installed and ready to go.

1. Push the hinge pin forward until you can see the little "c" clip, positioning it so the open end is toward you.

2. Using small punches or a screw driver, very carefully push on each end of the clip until it pops off. It doesn't take much, so take it slow and easy.

3. Force should not be required; the clip will be under the pin and easily removed. You can use tweezers, or a magnetic pickup, or carefully tilt the receiver until the clip comes out in your hand. Be careful it is small and is easily lost.

4. Make note of the cover spring position. If you don't have a diagram, take a picture so you can put it back right later.

5. Slide the hinge pin rearward, covering the spring with your hand so it is not lost when the tension is released.

6. Keep working the rod rearward until it is clear. Go slow so you don't scratch your upper receiver.

Installation is mostly reversing the above. An easy way to install the hinge pin spring is to position it with the short leg to the rear of the receiver, pointing up toward the ejection port.

1. Push the hinge pin into the spring a bit.

2. Grab the front part of the spring, lifting it away from the receiver and press the long leg down, allowing it to rest against the ejection port cover. Slide your hinge pin in the rest of the way.

3. Line up the little slot on the hinge pin with the front wall of the hinge pin channel. Use the wall to slide the clip down against the pin and use a punch to push it into place. You'll hear an audible click as it engages properly.
PWS Enhanced Buffer Tube 
PWS Enhanced Buffer Tube
The PWS Enhanced Buffer Tube is the first major upgrade and improvement to the buffer tube in ... More Info
Price: $99.99
Trijicon AR-15 3-DOT Night Sights 
Trijicon AR-15 3-DOT Night Sights
Trijicon Bright & Tough™ Night Sights are three-dot iron sights that increase night-fire shooting ... More Info
Price: $77.99
Magpul P-Mag 30 Round 
Magpul P-Mag 30 Round
The PMAG™ (Polymer MAGazine) is a lightweight 5.56 NATO, M-16 compatible magazine. It features an ... More Info
Price: $16.99
Knights Armament Rail Covers 
Knights Armament Rail Covers
Extremely low profile design with locking placement. Steel clip in the front of the panel will snap ... More Info
Price: $17.99
Gun Trust Attorney  About Us  Contact Us  Shipping & Returns  Privacy Policy  Conditions of Use
Copyright © 2005-2012 Top Notch Tactical. All Rights Reserved. Ecommerce Software by Visible.net

WELCOME to www.TOPNOTCHTACTICAL.com where you will find the best value and the highest quality of tactical equipment available. Whether you’re a recreational shooter or professional operator we have the gear you need. From close quarter tactical, to long range precision we feature the latest the industry has to offer. We also are distributors for ALS Technologies now AMTEC Less Lethal, NOVESKE, ACCU-SHOT, and more offering dealer, and agency pricing on their entire lines.

Top Notch Tactical is a Type 10 FFL/ Class II SOT and manufactures a variety innovative and cutting edge parts. We also staff a full time gunsmith specializing in modern military weaponry to help our customers with any custom builds or unique projects.

When seconds count we will never let you down. Any questions please call our knowledgeable sales staff at (253) 880-6911.